SOLVED Network Not working

[zplugger]

I have a hardwired home network and use a WNDA 3100V2 to connect to internet.The WNDA3100 will not work if the home network is on,I use a linksys router on the home network.Seems like the hardwire take firsr place.When I turn off the hardwire network the WNDA 3100 works perfect. Here is a look at what I got when both are on.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Larry>cd\
C:\>route print
===========================================================================
Interface List
20...00 8e f2 7e ac d4 ......NETGEAR WNDA3100v2 N600 Wireless Dual Band USB Ada
pter
10...00 1f d0 9d ec 83 ......Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit
Ethernet NIC (NDIS 6.20)
1...........................Software Loopback Interface 1
21...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
22...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.239 25
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.100 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.0.0 255.255.255.0 On-link 192.168.0.100 276
192.168.0.100 255.255.255.255 On-link 192.168.0.100 276
192.168.0.255 255.255.255.255 On-link 192.168.0.100 276
192.168.1.0 255.255.255.0 On-link 192.168.1.239 281
192.168.1.239 255.255.255.255 On-link 192.168.1.239 281
192.168.1.255 255.255.255.255 On-link 192.168.1.239 281
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.239 281
224.0.0.0 240.0.0.0 On-link 192.168.0.100 276
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.239 281
255.255.255.255 255.255.255.255 On-link 192.168.0.100 276
===========================================================================
Persistent Routes:
None
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
11 58 ::/0 On-link
1 306 ::1/128 On-link
11 58 2001::/32 On-link
11 306 2001:0:9d38:6ab8:c24:222a:3f57:ff9b/128
On-link
20 281 fe80::/64 On-link
10 276 fe80::/64 On-link
11 306 fe80::/64 On-link
11 306 fe80::c24:222a:3f57:ff9b/128
On-link
10 276 fe80::4d2e:3ec4:32c9:5dc1/128
On-link
20 281 fe80::ddcf:eefc:a78:58a0/128
On-link
1 306 ff00::/8 On-link
11 306 ff00::/8 On-link
20 281 ff00::/8 On-link
10 276 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
Any ideas to fix?

 

[zplugger]

Read where someone said change "Automatic Metric"., do not see this in my adapter setting or properties. When the home network is on the wnda3100 will show its connected to the internet. Just get nothing on the browser.

 

[TrainableMan]

You are correct, hard-wire takes presidency over wi-fi and I believe you can only be connected to one network at a time.

You might look at THIS and see if you can change the connection order but I'm not sure it will help you.

 

[zplugger]

Your the Man
This solved the problem,it was so simple after reading what to do. Did set the local network to share internet connection with the wireless.

Thank You so much

 

[TrainableMan]

Glad it worked. I have marked this as solved.

Have a great day.