SOLVED BSOD Problem related to ntoskrnl.exe

[jak321]

Hello their,

Got a extraordinary amount of BSOD due to this problem tried solving it through different sites nothing worked, basically whenever i leave my laptop idle for more then 15-20 mins it goes BSOD on me, tried everything ranging from HDD scans to memory scans nothing helps while searching i saw a thread where a person with similar problem posted and looks like his problem was solved >> Related Thread

I have checked my minidumps in bluescreen view and it seems all my errors are related to ntoskrnl.exe and nothing else i have attached every BSOD minidump i had , hopefully some kind soul here would be able to help me

Machine name: HP-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408-1631)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP G62 Notebook PC
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz (4 CPUs), ~2.4GHz
Memory: 2048MB RAM
Available OS Memory: 1910MB RAM
Page File: 1916MB used, 1902MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode

 

[Shintaro]

Welcome to the W7 forums.

My apologies for the slow responce.

You may have some serious hardware problem.

Probably caused by : memory_corruption
Bugcheck code 0000007A
Arguments fffff6fc`00019430 ffffffff`c0000185 00000000`46a21860 fffff800`03286007
DISK_HARDWARE_ERROR: There was error with disk hardware
BUGCHECK_STR: 0x7a_c0000185
DEFAULT_BUCKET_ID: CODE_CORRUPTION
PROCESS_NAME: svchost.exe
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_LARGE_4096

Probably caused by : memory_corruption
Bugcheck code 0000007A
Arguments fffff6fc`000191b0 ffffffff`c0000185 00000000`70022860 fffff800`032360a0
DISK_HARDWARE_ERROR: There was error with disk hardware
BUGCHECK_STR: 0x7a_c0000185
DEFAULT_BUCKET_ID: CODE_CORRUPTION
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_LARGE_4096

How old is the laptop?

For starters, what happens when you run from a command prompt: chkdsk /r

Let us know how you go.

 

[jak321]

hey, thanks for replying

hmm that's weird my laptop is only 1.5 years old plus except for BSOD it has never shown any sign of memory failure even BSOD started very recently they didn't occur before.
Anyway i ran the command and it took like 5 hrs xD but it managed to find and replace several bad file clusters,

 

[Shintaro]

OK, that sounds like your hard disk has some problems. Is the computer still under warranty?

Windows chkdsk ( Check Disk) can recovery data, but it cannot *fix* the problem.

Keep using it, but keep an eye on it. Maybe run chkdsk /r tomorrow and then once every three days.If the disk is ok, chkdsk will be a lot faster than 5 hours.

If the chkdsk continues to run for many hours, you will need to replace the disk.

In any case I strongly suggest that you back up your data somewhere.

Let us know how you go.

 

[jak321]

ok i ran the scan again today and as u said it took around 1.5 hrs this time instead of full 5-6 hrs since their were no bad file clusters I'll keep observing it for BSOD's thanks lets see what happens