| Home | Articles | Register | Members | Search | Windows 7 Support | Links |
 |
| Thread Tools |
|
Guest
Posts: n/a
Thanked:
|
Hello!
Does anyone know why my PS/2 mice, with its USB adapter (Logitech and eMachine), like to pause on my new EVGA X58 SLI (132-BL-E758; BIOS date 5/11/2010; v6.00 PG; release number IX58SZ64) motherboard in 32-bit Windows? I never had this problem with my other older motherboards with pure PS/2 connections, but this new motherboard only has a PS/2 keyboard port so I was forced to use a USB adapter for the mouse. The reason for a PS/2 mouse is because I use a KVM to share my monitor, mouse, and keyboard. I already eliminated the cables and KVM switch box to see where the pauses are coming from. They're not from KVM and its cables.  My PS/2 mice likes to pause in 32-bit Windows. Rear ports seems to pause way more than the front. The pauses can cause randomly and every few seconds. I also tried different adapter cables beside different PS/2 mice. I can reproduce this in both 32-bit Windows XP Pro. SP3 (safe mode too) and 7 PE liveCD. I was not able to reproduce it with a KNOPPIX v6.4.4 liveCD, but I did notice these USB errors in dmesg command: a_codec_realtek cx24123 cx24113 i7core_edac snd_hda_intel r8169 mii s5h1420 edac_core snd_hda_codec i2c_i801 [ 14.355804] Pid: 2102, comm: modprobe Tainted: G W 2.6.37 #13 [ 14.355807] Call Trace: [ 14.355812] [<c0133505>] warn_slowpath_common+0x77/0x8c [ 14.355816] [<c01fd12c>] ? __xlate_proc_name+0x99/0xa0 [ 14.355820] [<c01fd12c>] ? __xlate_proc_name+0x99/0xa0 [ 14.355824] [<c0133596>] warn_slowpath_fmt+0x2e/0x30 [ 14.355827] [<c01fd12c>] __xlate_proc_name+0x99/0xa0 [ 14.355831] [<c01fdb67>] __proc_create+0x46/0xea [ 14.355835] [<c01fdd8b>] proc_mkdir_mode+0x23/0x47 [ 14.355839] [<c01fddbe>] proc_mkdir+0xf/0x11 [ 14.355844] [<c01751e8>] register_handler_proc+0xce/0xde [ 14.355849] [<c01734af>] __setup_irq+0x216/0x277 [ 14.355854] [<c02f1fc2>] ? __pci_request_region+0xb0/0xf8 [ 14.355858] [<c017390d>] request_threaded_irq+0x109/0x12e [ 14.355865] [<f839a109>] ? flexcop_pci_isr+0x0/0xf0 [b2c2_flexcop_pci] [ 14.355871] [<f839a363>] flexcop_pci_probe+0x16a/0x281 [b2c2_flexcop_pci] [ 14.355875] [<c02f329f>] local_pci_probe+0x3e/0x81 [ 14.355879] [<c02f3d63>] pci_device_probe+0x43/0x66 [ 14.355884] [<c0380d7b>] driver_probe_device+0x97/0x128 [ 14.355887] [<c0380e4f>] __driver_attach+0x43/0x5f [ 14.355892] [<c0380532>] bus_for_each_dev+0x3d/0x67 [ 14.355896] [<c0380c13>] driver_attach+0x19/0x1b [ 14.355899] [<c0380e0c>] ? __driver_attach+0x0/0x5f [ 14.355902] [<c03808fb>] bus_add_driver+0x9e/0x1e3 [ 14.355906] [<c03810a2>] driver_register+0x84/0xeb [ 14.355910] [<c02f3f45>] __pci_register_driver+0x38/0x95 [ 14.355916] [<f839d017>] flexcop_pci_module_init+0x17/0x19 [b2c2_flexcop_pci] [ 14.355920] [<c0101174>] do_one_initcall+0x87/0x13d [ 14.355925] [<f839d000>] ? flexcop_pci_module_init+0x0/0x19 [b2c2_flexcop_pci] [ 14.355930] [<c015df40>] sys_init_module+0xcd4/0xe74 [ 14.355936] [<c057df05>] syscall_call+0x7/0xb [ 14.355940] ---[ end trace 5a0003f5d005a066 ]--- [ 14.366953] DVB: registering new adapter (FlexCop Digital TV device) [ 14.368564] b2c2-flexcop: MAC address = 00:d0:d7:30:19:c1 [ 14.369171] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) [ 14.369173] CX24123: wrong demod revision: 87 [ 14.570685] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121) [ 14.570689] Unknown/Unsupported NXT chip: 00 00 00 00 00 [ 14.571177] lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121) [ 14.571514] bcm3510: Revision: 0x1, Layer: 0xb. [ 14.583081] b2c2-flexcop: found 'Broadcom BCM3510 VSB/QAM frontend' . [ 14.583085] DVB: registering adapter 1 frontend 0 (Broadcom BCM3510 VSB/QAM frontend)... [ 14.583191] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC 1st generation' at the 'PCI' bus controlled by a 'FlexCopIIb' complete [ 14.612931] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 15.874030] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 15.894649] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.272853] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 20.818513] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 22.974664] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 26.511687] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 28.707741] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 31.679122] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 33.183186] [drm] Initialized drm 1.1.0 20060810 [ 33.412969] [drm] radeon kernel modesetting enabled. [ 33.413014] radeon 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 33.413018] radeon 0000:02:00.0: setting latency timer to 64 [ 33.413881] [drm] initializing kernel modesetting (RV770 0x1002:0x9440). [ 33.414052] [drm] register mmio base: 0xF3BE0000 [ 33.414055] [drm] register mmio size: 65536 [ 33.414275] ATOM BIOS: WEKIVA [ 33.414290] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 33.414292] radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF [ 33.417099] [drm] Detected VRAM RAM=512M, BAR=256M [ 33.417101] [drm] RAM width 256bits DDR [ 33.417163] [TTM] Zone kernel: Available graphics memory: 440070 kiB. [ 33.417166] [TTM] Zone highmem: Available graphics memory: 1291818 kiB. [ 33.417168] [TTM] Initializing pool allocator. [ 33.417185] [drm] radeon: 512M of VRAM memory ready [ 33.417187] [drm] radeon: 512M of GTT memory ready. [ 33.417232] radeon 0000:02:00.0: irq 44 for MSI/MSI-X [ 33.417237] radeon 0000:02:00.0: radeon: using MSI. [ 33.417263] [drm] radeon: irq initialized. [ 33.417265] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 33.417525] [drm] Loading RV770 Microcode [ 33.564928] radeon 0000:02:00.0: WB enabled [ 33.611699] [drm] ring test succeeded in 1 usecs [ 33.611807] [drm] radeon: ib pool ready. [ 33.611902] [drm] ib test succeeded in 0 usecs [ 33.611904] [drm] Enabling audio support [ 33.611909] failed to evaluate ATIF got AE_BAD_PARAMETER [ 33.612360] [drm] Radeon Display Connectors [ 33.612362] [drm] Connector 0: [ 33.612363] [drm] DVI-I [ 33.612364] [drm] HPD2 [ 33.612365] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 33.612366] [drm] Encoders: [ 33.612368] [drm] DFP1: INTERNAL_UNIPHY [ 33.612369] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 33.612370] [drm] Connector 1: [ 33.612371] [drm] DIN [ 33.612372] [drm] Encoders: [ 33.612373] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 33.612374] [drm] Connector 2: [ 33.612374] [drm] DVI-I [ 33.612375] [drm] HPD1 [ 33.612377] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c [ 33.612378] [drm] Encoders: [ 33.612379] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 33.612380] [drm] DFP2: INTERNAL_KLDSCP_LVTMA [ 33.718954] [drm] Internal thermal controller with fan control [ 33.719028] [drm] radeon: power management initialized [ 33.852563] [drm] fb mappable at 0xD0142000 [ 33.852565] [drm] vram apper at 0xD0000000 [ 33.852566] [drm] size 5242880 [ 33.852567] [drm] fb depth is 24 [ 33.852568] [drm] pitch is 5120 [ 34.278659] Console: switching to colour frame buffer device 160x64 [ 34.285293] fb0: radeondrmfb frame buffer device [ 34.285294] drm: registered panic notifier [ 34.285297] [drm] Initialized radeon 2.7.0 20080528 for 0000:02:00.0 on minor 0 [ 40.114035] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 42.180338] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 46.612427] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 49.680232] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 54.654704] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 62.480716] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 64.463835] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 67.049219] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 69.844227] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 79.277358] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 89.652149] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 94.872817] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 95.632505] NET: Registered protocol family 10 [ 95.633185] lo: Disabled Privacy Extensions [ 97.062232] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 103.108100] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 108.446748] lp: driver loaded but no devices found [ 108.470690] ppdev: user-space parallel port driver [ 108.498813] r8169 0000:07:00.0: eth0: link down [ 108.498899] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 108.534227] r8169 0000:08:00.0: eth1: link up [ 108.534238] r8169 0000:08:00.0: eth1: link up [ 114.008620] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 116.387697] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 119.036273] eth1: no IPv6 routers present [ 124.183759] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 130.093198] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 151.614751] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 159.354201] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 164.897676] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 181.125314] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 189.863026] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 198.287969] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 212.765426] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 220.704585] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 223.333203] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 226.407712] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 228.899943] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 231.086014] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 234.935796] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 239.201473] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 243.450576] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 259.398739] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 264.829034] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 269.820114] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 292.173511] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 328.791420] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 351.024955] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 353.221014] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 370.343766] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 378.465890] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 381.101197] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 393.678725] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 404.699026] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 413.905902] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 433.114917] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 436.019723] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 451.412212] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 462.702018] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 468.012513] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 472.431309] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 479.049477] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 483.508131] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 490.518934] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 505.102857] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 506.906330] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 511.571328] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 514.143401] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 516.888492] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 521.649982] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 526.105354] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 541.391366] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 543.713877] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 550.631512] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 553.107087] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 555.832232] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 557.812012] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 560.294241] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 570.406189] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 577.017682] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 581.619455] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 587.688625] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 594.386637] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 600.938226] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 607.060651] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 620.799395] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 631.533556] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 645.668278] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 653.797110] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 656.409120] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 668.930050] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 698.959723] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 715.084235] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 720.348117] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 732.822526] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 768.655149] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 799.909251] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 829.942268] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 840.277108] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 843.261804] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 851.121066] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 858.581075] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 860.727237] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 868.579872] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 882.252097] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 886.833925] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 894.956061] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 897.857542] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 904.013170] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 909.147360] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 934.831444] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 1012.020116] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 1019.303808] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 1038.076903] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 1040.961754] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 1088.001000] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 1094.046886] usb 7-1: reset low speed USB device using uhci_hcd and address 2 [ 1105.762590] usb 7-1: reset low speed USB device using uhci_hcd and address 2 Does Windows not reset USB device or something? I also tried Logitech Mouseware, but that didn't seem to help either. Thank you in advance.  FYI on my PC specifications: Intel i7 950 CPU, three 2 GB of Kingston HyperX T1 Series 240-Pin DDR3 SDRAM 2000 (PC3 16000) Desktop Memory Model KHX2000C9AD3T1K3/6GX DDR3 RAM (6 GB total; 2.5 GB shown; will install a 64-bit OS later on to use it all) in 32-bit old, updated Windows XP Pro. SP3 (Internet Explorer [rarely used] v6.0 SP3 and DirectX 9.0c [June 2010]), EVGA X58 SLI (132-BL-E758; BIOS date 5/11/2010; v6.00 PG; release number IX58SZ64) motherboard, MSI R4870-T2D512 OC Radeon HD 4870 512 MB (S-video+composite cables and adapter connected to Toshiba W-627 VCR to a January 1996 20" Sharp CRT TV), an used mid-tower Antec P180 ATX case, five 120 mm case fans, a side dual cooler fan to cool PCI cards, two onboard RealTek Gigabit Ethernets and onboard RealTek sound, Corsair CMPSU-650TX 650 watts ATX12V/EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC power supply, two Broadband Technologies Air2PC-ATSC-PCI HDTV tuner cards (DVB; revision 2; connected to a DB2 bowtie antenna), LG HL-DT-ST DVDRAM GH24NS50 burner drive, Sony NEC Optiarc DVD-RW AD-7220S SATA burner drive, two internal 7200 RPM Seagate SATA hard disk drives (HDDs) [ST3320620AS 320 GB and ST3500320AS 500 GB], and Logitech Z-2300 speakers (2.1 setup and analog). -- "I've been on some fairways that are as good as the greens we putted on back then. We had crab grass. I remember one green where I putted through ants." --Sam Snead /\___/\ Ant @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / If crediting, then use Ant nickname and AQFL URL/link. ( ) If e-mailing, then axe ANT from its address if needed. Ant is currently not listening to any songs on this computer. |
|
|
|
|||
|
|
| |
|
Guest
Posts: n/a
Thanked:
|
On 4/26/2011 7:04 AM PT, BillW50 typed:
> In news:, > Ant wrote: >> Hello! >> >> Does anyone know why my PS/2 mice, with its USB adapter (Logitech and >> eMachine), like to pause on my new EVGA X58 SLI (132-BL-E758; BIOS >> date 5/11/2010; v6.00 PG; release number IX58SZ64) motherboard in >> 32-bit Windows? I never had this problem with my other older >> motherboards with pure PS/2 connections, but this new motherboard only >> has a PS/2 keyboard port so I was forced to use a USB adapter for the >> mouse. The reason for a PS/2 mouse is because I use a KVM to share my >> monitor, mouse, and keyboard. I already eliminated the cables and KVM >> switch box to see where the pauses are coming from. They're not from >> KVM and its cables. >> My PS/2 mice likes to pause in 32-bit Windows. Rear ports seems to >> pause way more than the front. The pauses can cause randomly and every >> few seconds. I also tried different adapter cables beside different >> PS/2 mice. I can reproduce this in both 32-bit Windows XP Pro. SP3 >> (safe mode too) and 7 PE liveCD. > > Many of those machines with only one PS/2 port, can handle a mouse and a > keyboard used in the same port. I would test to make sure that having > one or the other works fine first. And if that passes, I would buy one > of those PS/2 Y cables. And then you should be good to go. Well, my motherboard shows a keyboard logo on that PS/2 port. Are you saying connecting a PS/2 splitter for a mouse and keyboard would work and fix the mouse pauses? -- "If you're an ant, and you're walking along across the top of a cup of pudding, you probably have no idea that the only thing between you and disaster is the strength of that pudding skin." --Jack Handy from Saturday Night Live /\___/\ Ant @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / If crediting, then use Ant nickname and AQFL URL/link. ( ) If e-mailing, then axe ANT from its address if needed. Ant is currently not listening to any songs on this computer. |
|
|
|
|
|||
|
Guest
Posts: n/a
Thanked:
|
I forgot to mention eMachine mouse was a ball type and the Logitech was
an optical laser type. They didn't make any differences. Also, I tried two different PS/2+USB adapters as well. On 4/26/2011 6:33 AM PT, Ant typed: > Hello! > > Does anyone know why my PS/2 mice, with its USB adapter (Logitech and > eMachine), like to pause on my new EVGA X58 SLI (132-BL-E758; BIOS date > 5/11/2010; v6.00 PG; release number IX58SZ64) motherboard in 32-bit > Windows? I never had this problem with my other older motherboards with > pure PS/2 connections, but this new motherboard only has a PS/2 keyboard > port so I was forced to use a USB adapter for the mouse. The reason for > a PS/2 mouse is because I use a KVM to share my monitor, mouse, and > keyboard. I already eliminated the cables and KVM switch box to see > where the pauses are coming from. They're not from KVM and its cables. > > My PS/2 mice likes to pause in 32-bit Windows. Rear ports seems to pause > way more than the front. The pauses can cause randomly and every few > seconds. I also tried different adapter cables beside different PS/2 > mice. I can reproduce this in both 32-bit Windows XP Pro. SP3 (safe mode > too) and 7 PE liveCD. > > I was not able to reproduce it with a KNOPPIX v6.4.4 liveCD, but I did > notice these USB errors in dmesg command: > a_codec_realtek cx24123 cx24113 i7core_edac snd_hda_intel r8169 mii > s5h1420 edac_core snd_hda_codec i2c_i801 > [ 14.355804] Pid: 2102, comm: modprobe Tainted: G W 2.6.37 #13 > [ 14.355807] Call Trace: > [ 14.355812] [<c0133505>] warn_slowpath_common+0x77/0x8c > [ 14.355816] [<c01fd12c>] ? __xlate_proc_name+0x99/0xa0 > [ 14.355820] [<c01fd12c>] ? __xlate_proc_name+0x99/0xa0 > [ 14.355824] [<c0133596>] warn_slowpath_fmt+0x2e/0x30 > [ 14.355827] [<c01fd12c>] __xlate_proc_name+0x99/0xa0 > [ 14.355831] [<c01fdb67>] __proc_create+0x46/0xea > [ 14.355835] [<c01fdd8b>] proc_mkdir_mode+0x23/0x47 > [ 14.355839] [<c01fddbe>] proc_mkdir+0xf/0x11 > [ 14.355844] [<c01751e8>] register_handler_proc+0xce/0xde > [ 14.355849] [<c01734af>] __setup_irq+0x216/0x277 > [ 14.355854] [<c02f1fc2>] ? __pci_request_region+0xb0/0xf8 > [ 14.355858] [<c017390d>] request_threaded_irq+0x109/0x12e > [ 14.355865] [<f839a109>] ? flexcop_pci_isr+0x0/0xf0 [b2c2_flexcop_pci] > [ 14.355871] [<f839a363>] flexcop_pci_probe+0x16a/0x281 [b2c2_flexcop_pci] > [ 14.355875] [<c02f329f>] local_pci_probe+0x3e/0x81 > [ 14.355879] [<c02f3d63>] pci_device_probe+0x43/0x66 > [ 14.355884] [<c0380d7b>] driver_probe_device+0x97/0x128 > [ 14.355887] [<c0380e4f>] __driver_attach+0x43/0x5f > [ 14.355892] [<c0380532>] bus_for_each_dev+0x3d/0x67 > [ 14.355896] [<c0380c13>] driver_attach+0x19/0x1b > [ 14.355899] [<c0380e0c>] ? __driver_attach+0x0/0x5f > [ 14.355902] [<c03808fb>] bus_add_driver+0x9e/0x1e3 > [ 14.355906] [<c03810a2>] driver_register+0x84/0xeb > [ 14.355910] [<c02f3f45>] __pci_register_driver+0x38/0x95 > [ 14.355916] [<f839d017>] flexcop_pci_module_init+0x17/0x19 > [b2c2_flexcop_pci] > [ 14.355920] [<c0101174>] do_one_initcall+0x87/0x13d > [ 14.355925] [<f839d000>] ? flexcop_pci_module_init+0x0/0x19 > [b2c2_flexcop_pci] > [ 14.355930] [<c015df40>] sys_init_module+0xcd4/0xe74 > [ 14.355936] [<c057df05>] syscall_call+0x7/0xb > [ 14.355940] ---[ end trace 5a0003f5d005a066 ]--- > [ 14.366953] DVB: registering new adapter (FlexCop Digital TV device) > [ 14.368564] b2c2-flexcop: MAC address = 00:d0:d7:30:19:c1 > [ 14.369171] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) > [ 14.369173] CX24123: wrong demod revision: 87 > [ 14.570685] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err > == -121) > [ 14.570689] Unknown/Unsupported NXT chip: 00 00 00 00 00 > [ 14.571177] lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error > (ret == -121) > [ 14.571514] bcm3510: Revision: 0x1, Layer: 0xb. > [ 14.583081] b2c2-flexcop: found 'Broadcom BCM3510 VSB/QAM frontend' . > [ 14.583085] DVB: registering adapter 1 frontend 0 (Broadcom BCM3510 > VSB/QAM frontend)... > [ 14.583191] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC 1st > generation' at the 'PCI' bus controlled by a 'FlexCopIIb' complete > [ 14.612931] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 15.874030] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > [ 15.894649] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 16.272853] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 20.818513] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 22.974664] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 26.511687] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 28.707741] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 31.679122] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 33.183186] [drm] Initialized drm 1.1.0 20060810 > [ 33.412969] [drm] radeon kernel modesetting enabled. > [ 33.413014] radeon 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 33.413018] radeon 0000:02:00.0: setting latency timer to 64 > [ 33.413881] [drm] initializing kernel modesetting (RV770 0x1002:0x9440). > [ 33.414052] [drm] register mmio base: 0xF3BE0000 > [ 33.414055] [drm] register mmio size: 65536 > [ 33.414275] ATOM BIOS: WEKIVA > [ 33.414290] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 - > 0x000000001FFFFFFF (512M used) > [ 33.414292] radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 - > 0x000000003FFFFFFF > [ 33.417099] [drm] Detected VRAM RAM=512M, BAR=256M > [ 33.417101] [drm] RAM width 256bits DDR > [ 33.417163] [TTM] Zone kernel: Available graphics memory: 440070 kiB. > [ 33.417166] [TTM] Zone highmem: Available graphics memory: 1291818 kiB. > [ 33.417168] [TTM] Initializing pool allocator. > [ 33.417185] [drm] radeon: 512M of VRAM memory ready > [ 33.417187] [drm] radeon: 512M of GTT memory ready. > [ 33.417232] radeon 0000:02:00.0: irq 44 for MSI/MSI-X > [ 33.417237] radeon 0000:02:00.0: radeon: using MSI. > [ 33.417263] [drm] radeon: irq initialized. > [ 33.417265] [drm] GART: num cpu pages 131072, num gpu pages 131072 > [ 33.417525] [drm] Loading RV770 Microcode > [ 33.564928] radeon 0000:02:00.0: WB enabled > [ 33.611699] [drm] ring test succeeded in 1 usecs > [ 33.611807] [drm] radeon: ib pool ready. > [ 33.611902] [drm] ib test succeeded in 0 usecs > [ 33.611904] [drm] Enabling audio support > [ 33.611909] failed to evaluate ATIF got AE_BAD_PARAMETER > [ 33.612360] [drm] Radeon Display Connectors > [ 33.612362] [drm] Connector 0: > [ 33.612363] [drm] DVI-I > [ 33.612364] [drm] HPD2 > [ 33.612365] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c > 0x7e6c > [ 33.612366] [drm] Encoders: > [ 33.612368] [drm] DFP1: INTERNAL_UNIPHY > [ 33.612369] [drm] CRT2: INTERNAL_KLDSCP_DAC2 > [ 33.612370] [drm] Connector 1: > [ 33.612371] [drm] DIN > [ 33.612372] [drm] Encoders: > [ 33.612373] [drm] TV1: INTERNAL_KLDSCP_DAC2 > [ 33.612374] [drm] Connector 2: > [ 33.612374] [drm] DVI-I > [ 33.612375] [drm] HPD1 > [ 33.612377] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c > 0x7e2c > [ 33.612378] [drm] Encoders: > [ 33.612379] [drm] CRT1: INTERNAL_KLDSCP_DAC1 > [ 33.612380] [drm] DFP2: INTERNAL_KLDSCP_LVTMA > [ 33.718954] [drm] Internal thermal controller with fan control > [ 33.719028] [drm] radeon: power management initialized > [ 33.852563] [drm] fb mappable at 0xD0142000 > [ 33.852565] [drm] vram apper at 0xD0000000 > [ 33.852566] [drm] size 5242880 > [ 33.852567] [drm] fb depth is 24 > [ 33.852568] [drm] pitch is 5120 > [ 34.278659] Console: switching to colour frame buffer device 160x64 > [ 34.285293] fb0: radeondrmfb frame buffer device > [ 34.285294] drm: registered panic notifier > [ 34.285297] [drm] Initialized radeon 2.7.0 20080528 for 0000:02:00.0 on > minor 0 > [ 40.114035] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 42.180338] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 46.612427] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 49.680232] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 54.654704] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 62.480716] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 64.463835] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 67.049219] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 69.844227] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 79.277358] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 89.652149] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 94.872817] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 95.632505] NET: Registered protocol family 10 > [ 95.633185] lo: Disabled Privacy Extensions > [ 97.062232] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 103.108100] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 108.446748] lp: driver loaded but no devices found > [ 108.470690] ppdev: user-space parallel port driver > [ 108.498813] r8169 0000:07:00.0: eth0: link down > [ 108.498899] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 108.534227] r8169 0000:08:00.0: eth1: link up > [ 108.534238] r8169 0000:08:00.0: eth1: link up > [ 114.008620] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 116.387697] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 119.036273] eth1: no IPv6 routers present > [ 124.183759] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 130.093198] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 151.614751] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 159.354201] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 164.897676] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 181.125314] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 189.863026] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 198.287969] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 212.765426] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 220.704585] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 223.333203] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 226.407712] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 228.899943] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 231.086014] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 234.935796] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 239.201473] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 243.450576] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 259.398739] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 264.829034] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 269.820114] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 292.173511] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 328.791420] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 351.024955] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 353.221014] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 370.343766] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 378.465890] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 381.101197] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 393.678725] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 404.699026] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 413.905902] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 433.114917] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 436.019723] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 451.412212] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 462.702018] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 468.012513] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 472.431309] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 479.049477] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 483.508131] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 490.518934] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 505.102857] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 506.906330] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 511.571328] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 514.143401] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 516.888492] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 521.649982] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 526.105354] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 541.391366] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 543.713877] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 550.631512] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 553.107087] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 555.832232] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 557.812012] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 560.294241] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 570.406189] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 577.017682] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 581.619455] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 587.688625] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 594.386637] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 600.938226] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 607.060651] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 620.799395] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 631.533556] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 645.668278] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 653.797110] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 656.409120] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 668.930050] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 698.959723] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 715.084235] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 720.348117] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 732.822526] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 768.655149] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 799.909251] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 829.942268] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 840.277108] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 843.261804] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 851.121066] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 858.581075] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 860.727237] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 868.579872] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 882.252097] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 886.833925] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 894.956061] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 897.857542] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 904.013170] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 909.147360] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 934.831444] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 1012.020116] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 1019.303808] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 1038.076903] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 1040.961754] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 1088.001000] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 1094.046886] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > [ 1105.762590] usb 7-1: reset low speed USB device using uhci_hcd and > address 2 > > > Does Windows not reset USB device or something? I also tried Logitech > Mouseware, but that didn't seem to help either. > > Thank you in advance. > > FYI on my PC specifications: Intel i7 950 CPU, three 2 GB of Kingston > HyperX T1 Series 240-Pin DDR3 SDRAM 2000 (PC3 16000) Desktop Memory > Model KHX2000C9AD3T1K3/6GX DDR3 RAM (6 GB total; 2.5 GB shown; will > install a 64-bit OS later on to use it all) in 32-bit old, updated > Windows XP Pro. SP3 (Internet Explorer [rarely used] v6.0 SP3 and > DirectX 9.0c [June 2010]), EVGA X58 SLI (132-BL-E758; BIOS date > 5/11/2010; v6.00 PG; release number IX58SZ64) motherboard, MSI > R4870-T2D512 OC Radeon HD 4870 512 MB (S-video+composite cables and > adapter connected to Toshiba W-627 VCR to a January 1996 20" Sharp CRT > TV), an used mid-tower Antec P180 ATX case, five 120 mm case fans, a > side dual cooler fan to cool PCI cards, two onboard RealTek Gigabit > Ethernets and onboard RealTek sound, Corsair CMPSU-650TX 650 watts > ATX12V/EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC > power supply, two Broadband Technologies Air2PC-ATSC-PCI HDTV tuner > cards (DVB; revision 2; connected to a DB2 bowtie antenna), LG HL-DT-ST > DVDRAM GH24NS50 burner drive, Sony NEC Optiarc DVD-RW AD-7220S SATA > burner drive, two internal 7200 RPM Seagate SATA hard disk drives (HDDs) > [ST3320620AS 320 GB and ST3500320AS 500 GB], and Logitech Z-2300 > speakers (2.1 setup and analog). -- "Go to the ant, thou sluggard; consider her ways and be wise: which having no guide, overseer or ruler, provideth her meat in the summer and gathereth her food in the harvest." --Proverbs 6:6-8 (Bible) /\___/\ Ant @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / If crediting, then use Ant nickname and AQFL URL/link. ( ) If e-mailing, then axe ANT from its address if needed. Ant is currently not listening to any songs on this computer. |
|
|
|
|
|||
|
Guest
Posts: n/a
Thanked:
|
|
|
|
|
||
|
Guest
Posts: n/a
Thanked:
|
> >> Many of those machines with only one PS/2 port, can handle a mouse
> >> and a keyboard used in the same port. I would test to make sure that > >> having one or the other works fine first. And if that passes, I > >> would buy one of those PS/2 Y cables. And then you should be good to > >> go. > > > > Well, my motherboard shows a keyboard logo on that PS/2 port. Are you > > saying connecting a PS/2 splitter for a mouse and keyboard would work > > and fix the mouse pauses? > I am saying sometimes the single PS/2 could handle both. And I would try > a PS/2 mouse in the port to see if that works. If it does, I would buy a > Y cable. As I believe there is a good chance that it would work. And > yes, I would think it would solve your problem too. OK, I will try it. I hope I don't fry my motherboard!  -- Quote of the Week: "The foreign policy aim of ants can be summed up as follows: restless aggression, territorial conquest, and genocidal annihilation of neighboring colonies whenever possible. If ants had nuclear weapons, they would probably end the world in a week." --Journey to the Ants, page 59. Bert Holldobler & Edward O. Wilson /\___/\ Ant @ http://antfarm.home.dhs.org (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / Please nuke ANT if replying by e-mail. If crediting, ( ) then please kindly use Ant nickname and AQFL URL/link. |
|
|
|
|
|||
|
Guest
Posts: n/a
Thanked:
|
On 4/26/2011 7:29 AM PT, BillW50 typed:
> In news:IpednQ8OO-, > Ant wrote: >> On 4/26/2011 7:04 AM PT, BillW50 typed: >>> Many of those machines with only one PS/2 port, can handle a mouse >>> and a keyboard used in the same port. I would test to make sure that >>> having one or the other works fine first. And if that passes, I >>> would buy one of those PS/2 Y cables. And then you should be good to >>> go. >> >> Well, my motherboard shows a keyboard logo on that PS/2 port. Are you >> saying connecting a PS/2 splitter for a mouse and keyboard would work >> and fix the mouse pauses? > > I am saying sometimes the single PS/2 could handle both. And I would try > a PS/2 mouse in the port to see if that works. If it does, I would buy a > Y cable. As I believe there is a good chance that it would work. And > yes, I would think it would solve your problem too. I tried hooking both mouse and keyboard to a PS/2+USB adapter splitter (purple and green). It was working for about 30 minutes and then both devices started pausing (not just the mouse like earlier). When I type on my PS/2 keyboard and pauses occur, it either doesn't register my keys or gets stuccccccccccccccck like that. -- "The little ant at its hole is full of courage." --African /\___/\ Ant @ http://antfarm.ma.cx (Personal Web Site) / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net | |o o| | \ _ / If crediting, then use Ant nickname and AQFL URL/link. ( ) If e-mailing, then axe ANT from its address if needed. Ant is currently not listening to any songs on this computer. |
|
|
|
|
|||
|
|
| |
|
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How to Install Windows 7 | davehc | Software | 0 | 08-16-2010 02:50 PM |
| Windows 7 Annoyances | Nibiru2012 | General Discussion | 6 | 03-17-2010 06:17 PM |
| Clean Install Windows 7 with Upgrade Media | Nibiru2012 | Installation, Setup and Updates | 0 | 12-22-2009 07:03 PM |
| Clean Install Windows 7 with Upgrade Media | Nibiru2012 | Installation, Setup and Updates | 2 | 12-04-2009 06:30 PM |
| Important Issues in This Release Candidate of Windows 7 | Ian | News | 0 | 05-05-2009 03:25 PM |
