How can I replace Win-7 video driver with Vista or XP driver?

I've got a desktop system where the motherboard has Intel 82G965/963
on-board graphics controller. I've installed both XP and Win-7 on this
system (but not on the same hard drive). So all I'm saying is that I
can run either XP or 7 on this system by selecting which drive is
connected to the system. (this is an experimental industrial / lab
system).

This is the 32-bit versions of XP and 7 (not 64 bit).

There's a 16-bit DOS program that I need to run on the system, and it
runs just fine in XP. The program runs in full-screen mode (takes over
the whole screen - it doesn't / can't run in a window).

The program will not run under win-7, because the win-7 video driver
won't allow a command-shell to run in full-screen mode. I've messed
with the file-properies of the 16-bit executable and that doesn't help
(well, it might help, but it doesn't get me where I need to go).

Now, I've searched the internet and have played around with wmic and
have "disabled" the video adapter in the device manager. When I disable
the video adapter, win-7 reverts to some sort of 800 x 600 VGA mode and
the DOS program will run ok in full-screen mode. But when I re-enable
the video adapter, the program won't run - and trying to run cmd from
the start menu is broken - it doesn't work any more (I think this has
something to do with the window properties I changes when running wmic).

Something else that might work is to replace the win-7 video driver with
either Vista or XP versions - and here is where I'm running into
problems: How do I force win-7 to use these drivers?

I downloaded the vista driver for the G965/963 chipset from Intel, but
the setup program refuses to run (it says wrong OS) and even when I
unpack the driver package and try to point device manager to "update"
the driver, it refuses and says I already have the most recent (or most
appropriate) driver.

So - is there any way I can force XP to install and use either an XP or
Vista video driver - so that (theoretically) I can have a true
full-screen DOS (CMD) mode?

Hi, XP Guy.

> I've installed both XP and Win-7 on this system...

WHICH Win7? Home? Professional? Ultimate?

Sounds like you need Win7's XP Mode. It is free, but can be installed only
Win7 Pro or Ultimate:
Install and use Windows XP Mode in Windows 7
http://windows.microsoft.com/en-us/w...e-in-windows-7

RC
--
R. C. White, CPA
San Marcos, TX

Microsoft Windows MVP (2002-2010)
Windows Live Mail 2011 (Build 15.4.3555.0308) in Win7 Ultimate x64 SP1


"XP Guy" wrote in message news:...

I've got a desktop system where the motherboard has Intel 82G965/963
on-board graphics controller. I've installed both XP and Win-7 on this
system (but not on the same hard drive). So all I'm saying is that I
can run either XP or 7 on this system by selecting which drive is
connected to the system. (this is an experimental industrial / lab
system).

This is the 32-bit versions of XP and 7 (not 64 bit).

There's a 16-bit DOS program that I need to run on the system, and it
runs just fine in XP. The program runs in full-screen mode (takes over
the whole screen - it doesn't / can't run in a window).

The program will not run under win-7, because the win-7 video driver
won't allow a command-shell to run in full-screen mode. I've messed
with the file-properies of the 16-bit executable and that doesn't help
(well, it might help, but it doesn't get me where I need to go).

Now, I've searched the internet and have played around with wmic and
have "disabled" the video adapter in the device manager. When I disable
the video adapter, win-7 reverts to some sort of 800 x 600 VGA mode and
the DOS program will run ok in full-screen mode. But when I re-enable
the video adapter, the program won't run - and trying to run cmd from
the start menu is broken - it doesn't work any more (I think this has
something to do with the window properties I changes when running wmic).

Something else that might work is to replace the win-7 video driver with
either Vista or XP versions - and here is where I'm running into
problems: How do I force win-7 to use these drivers?

I downloaded the vista driver for the G965/963 chipset from Intel, but
the setup program refuses to run (it says wrong OS) and even when I
unpack the driver package and try to point device manager to "update"
the driver, it refuses and says I already have the most recent (or most
appropriate) driver.

So - is there any way I can force XP to install and use either an XP or
Vista video driver - so that (theoretically) I can have a true
full-screen DOS (CMD) mode?

On 4/19/2012, R. C. White posted:
> Hi, XP Guy.

>> I've installed both XP and Win-7 on this system...

> WHICH Win7? Home? Professional? Ultimate?

> Sounds like you need Win7's XP Mode. It is free, but can be installed only
> Win7 Pro or Ultimate:
> Install and use Windows XP Mode in Windows 7
> http://windows.microsoft.com/en-us/w...e-in-windows-7

Alternatively get VMware reader and a paid-for version of XP, if the
version of Win 7 doesn't allow XP Mode.

> RC
> --
> R. C. White, CPA
> San Marcos, TX
>
> Microsoft Windows MVP (2002-2010)
> Windows Live Mail 2011 (Build 15.4.3555.0308) in Win7 Ultimate x64 SP1


> "XP Guy" wrote in message news:...

> I've got a desktop system where the motherboard has Intel 82G965/963
> on-board graphics controller. I've installed both XP and Win-7 on this
> system (but not on the same hard drive). So all I'm saying is that I
> can run either XP or 7 on this system by selecting which drive is
> connected to the system. (this is an experimental industrial / lab
> system).

> This is the 32-bit versions of XP and 7 (not 64 bit).

> There's a 16-bit DOS program that I need to run on the system, and it
> runs just fine in XP. The program runs in full-screen mode (takes over
> the whole screen - it doesn't / can't run in a window).

> The program will not run under win-7, because the win-7 video driver
> won't allow a command-shell to run in full-screen mode. I've messed
> with the file-properies of the 16-bit executable and that doesn't help
> (well, it might help, but it doesn't get me where I need to go).

> Now, I've searched the internet and have played around with wmic and
> have "disabled" the video adapter in the device manager. When I disable
> the video adapter, win-7 reverts to some sort of 800 x 600 VGA mode and
> the DOS program will run ok in full-screen mode. But when I re-enable
> the video adapter, the program won't run - and trying to run cmd from
> the start menu is broken - it doesn't work any more (I think this has
> something to do with the window properties I changes when running wmic).

> Something else that might work is to replace the win-7 video driver with
> either Vista or XP versions - and here is where I'm running into
> problems: How do I force win-7 to use these drivers?

> I downloaded the vista driver for the G965/963 chipset from Intel, but
> the setup program refuses to run (it says wrong OS) and even when I
> unpack the driver package and try to point device manager to "update"
> the driver, it refuses and says I already have the most recent (or most
> appropriate) driver.

> So - is there any way I can force XP to install and use either an XP or
> Vista video driver - so that (theoretically) I can have a true
> full-screen DOS (CMD) mode?

--
Gene E. Bloch (Stumbling Bloch)

"Gene E. Bloch" wrote:

> >> I've installed both XP and Win-7 on this system...
>
> > WHICH Win7? Home? Professional? Ultimate?

Does it matter?

It's from technet. We have all versions. It wouldn't be home version.

> > Sounds like you need Win7's XP Mode. It is free, but can be
> > installed only Win7 Pro or Ultimate:

No, I don't want to install XP mode, or VMware.

The software performs direct hardware access (using porttalk) so I don't
want to complicate things by running it in a VM (which it probably
wouldn't run correctly anyways).

I remember we tried running this in Windows Vista a few years ago and it
did run just fine - because Vista does (or did) allow full-screen DOS or
CMD mode.

So - is there any way I can force XP to install and use either an XP or
Vista video driver - so that (theoretically) I can have a true
full-screen DOS (CMD) mode?

In message <>, XP Guy <> writes:
[]
>So - is there any way I can force XP to install and use either an XP or
>Vista video driver - so that (theoretically) I can have a true
>full-screen DOS (CMD) mode?

Assuming you meant "force 7" rather than "force XP" there: I think you
said earlier that 7 doesn't allow a cmd window to go full screen. If
this is truly the case (i. e. 7 doesn't allow full-screen CMD), then I
suspect that just having a driver which might allow it won't help.

Not that I think it'll help for the above reason, but you did say you
tried loading the Vista driver but it said you had a more recent one;
presumably you tried removing the 7 driver (assuming you've got it on a
disc so you can put it back when the attempt fails)?
--
J. P. Gilliver. UMRA: 1960/<1985 MB++G.5AL-IS-P--Ch++(p)Ar@T0H+Sh0!:`)DNAf

"I'm tired of all this nonsense about beauty being only skin-deep. That's deep
enough. What do you want, an adorable pancreas?" - Jean Kerr

"XP Guy" <> wrote in message news:...
> I've got a desktop system where the motherboard has Intel 82G965/963
> on-board graphics controller. I've installed both XP and Win-7 on this
> system (but not on the same hard drive). So all I'm saying is that I
> can run either XP or 7 on this system by selecting which drive is
> connected to the system. (this is an experimental industrial / lab
> system).
>
> This is the 32-bit versions of XP and 7 (not 64 bit).
>
> There's a 16-bit DOS program that I need to run on the system, and it
> runs just fine in XP. The program runs in full-screen mode (takes over
> the whole screen - it doesn't / can't run in a window).
>
> The program will not run under win-7, because the win-7 video driver
> won't allow a command-shell to run in full-screen mode. I've messed
> with the file-properies of the 16-bit executable and that doesn't help
> (well, it might help, but it doesn't get me where I need to go).
>
> Now, I've searched the internet and have played around with wmic and
> have "disabled" the video adapter in the device manager. When I disable
> the video adapter, win-7 reverts to some sort of 800 x 600 VGA mode and
> the DOS program will run ok in full-screen mode. But when I re-enable
> the video adapter, the program won't run - and trying to run cmd from
> the start menu is broken - it doesn't work any more (I think this has
> something to do with the window properties I changes when running wmic).
>
> Something else that might work is to replace the win-7 video driver with
> either Vista or XP versions - and here is where I'm running into
> problems: How do I force win-7 to use these drivers?
>
> I downloaded the vista driver for the G965/963 chipset from Intel, but
> the setup program refuses to run (it says wrong OS) and even when I
> unpack the driver package and try to point device manager to "update"
> the driver, it refuses and says I already have the most recent (or most
> appropriate) driver.
>
> So - is there any way I can force XP to install and use either an XP or
> Vista video driver - so that (theoretically) I can have a true
> full-screen DOS (CMD) mode?

You'll have to uninstall the current Win7 driver first. Reboot, and when the "Found new hardware" comes up, cancel. It
will probably then leave you with the default VGA driver (this is good). Now you can install the Vista driver (you may
have to do it in Compatibility mode). I did something similar to this when I had to install an earlier ATI driver on my
laptop.
You also might have to either temporarily disable automatic updates, or change it to "notify me when. . ." in order to
keep it from installing an updated driver over your Vista one. If you choose "notify me. . .", then you can uncheck the
update, then right-click on it and select "Don't notify me of this driver again."

One machine I did this on, I had to boot into safe mode to do it all, but I don't remember if that was my Win7 or XP
machine (I love messing around with various programs and utilities; sometimes it bites me in the ass. Gotta love a
recent disk image :-) )
--
SC Tom

On Fri, 20 Apr 2012 00:16:27 -0400, "XP Guy" <> wrote in
article <>...
>
>
> I remember we tried running this in Windows Vista a few years ago and it
> did run just fine - because Vista does (or did) allow full-screen DOS or
> CMD mode.

FWIW, I just checked this on my Vista test platform and it did not
allow full-screen CMD modes, so you'll probably want to go with the XP
driver.

--
Zaphod

"So [Trillian], two heads is what does it for a girl?"
"...Anything else [Zaphod]'s got two of?"
- Arthur Dent

"J. P. Gilliver (John)" wrote:

> > So - is there any way I can force win-7 to install and use either
> > an XP or Vista video driver - so that (theoretically) I can have
> > a true full-screen DOS (CMD) mode?
>
> I think you said earlier that 7 doesn't allow a cmd window to go
> full screen. If this is truly the case

Do a google search for this phrase:

"windows 7" full screen dos mode

You'll see this is a real behavior or observation.

In XP, if you open a command shell and hit alt-enter, you'll see that
the window will open to full-screen. You can't do that with Windows 7.

I know this did work a few years ago when we tried this on a different
machine running Vista - but this could very well have been a pre-release
candidate of Vista.

I see that this full-screen ability must have been taken away from
Vista:

http://www.mydigitallife.info/workar...windows-vista/

============
When you attempt open or run DOS .com applications, .bat batch scripts
or games that relies on command prompt, and including cmd.exe itself,
you will encounter the following error message:

This system does not support fullscreen mode. Choose “Close” to
terminate the application.

The lack of support for full screen DOS command prompt in Windows Vista
is a big annoyance especially for those who still playing games for DOS
and Windows 3.1/9x era, use legacy software such as WPDOS or programmers
who frequently switch to command prompt to use DOS based programming
language such as PASCAL.
=============

I'm getting the exact same error message for the 16-bit app I'm trying
to run under win-7.

I'll have to try the trick shown on that page to run the Vista video
driver install program under XP compatibility mode. If the Vista driver
still won't let me have full-screen mode, then I'll try the XP driver.
(I don't care if I lose the aero mode).

> you did say you tried loading the Vista driver but it said you
> had a more recent one; presumably you tried removing the 7 driver
> (assuming you've got it on a disc so you can put it back when
> the attempt fails)?

I'm not sure how to tell win-7 to "remove" the existing driver (vs
replace or update the driver). The existing driver must be part of
win-7 because I didn't have to feed it to win-7 during installation of
the OS. So it must be part of win-7 core install files.

On 19/04/2012 8:58 PM, XP Guy wrote:
> Something else that might work is to replace the win-7 video driver with
> either Vista or XP versions - and here is where I'm running into
> problems: How do I force win-7 to use these drivers?
>
> I downloaded the vista driver for the G965/963 chipset from Intel, but
> the setup program refuses to run (it says wrong OS) and even when I
> unpack the driver package and try to point device manager to "update"
> the driver, it refuses and says I already have the most recent (or most
> appropriate) driver.
>
> So - is there any way I can force XP to install and use either an XP or
> Vista video driver - so that (theoretically) I can have a true
> full-screen DOS (CMD) mode?

The XP driver definitely won't work, the driver model is too different
between XP and 7. However, the Win7 driver model was first introduced in
Vista, so that one might work, if you can find a way to uninstall the
existing Windows 7 driver.

Yousuf Khan

On 20/04/2012 12:16 AM, XP Guy wrote:
>>> Sounds like you need Win7's XP Mode. It is free, but can be
>>> installed only Win7 Pro or Ultimate:
>
> No, I don't want to install XP mode, or VMware.
>
> The software performs direct hardware access (using porttalk) so I don't
> want to complicate things by running it in a VM (which it probably
> wouldn't run correctly anyways).

You seem to distrust virtualization's capabilities. Most of these
virtualization software will also virtualize the ports and make it look
like it's running on a bog standard VGA or SVGA adapter of some kind. So
even direct hardware port accesses are also virtualized. If you got the
Ultimate or Pro, then go ahead and install the XP Mode on the machine,
it'll only take up a bit of your time, and you'll never know it works
until you try it. In fact, running the Sysinfo under my XP Mode, I see
it sees an S3 Trio video adapter running. My system is actually running
an AMD Radeon HD 6870, so it's obviously virtualized.

There's nothing complicated about it, XP Mode doesn't run automatically
at Windows startup, so it doesn't take up any resources until you click
on it.

Yousuf Khan